In the course of time, the battery uses in your Power Tool down. Power Tool with used batteries operate more slowly than those with good batteries, and finally they give quite. Replace the battery takes a few minutes and get your equipment ready for the job. You buy the right Power tool battery for your needs, because not all batteries are created equal. Note that Ni-MH or nickel-metal hydride batteries should be recharged and NI-CD or nickel-cadmium batteries are not. Their drill can either run with type.There are 5 Makita batteris about for Ni-MH and Ni-CD.For example,MAKITA 1222 battery, MAKITA 1233 battery, MAKITA 1422 battery, MAKITA 1433 battery, MAKITA 1434 battery.
What is more important, consider before purchasing your battery: price and durability. Power tool battery packs in a specified range of sizes and amp (sometimes abbreviated as AH) come. The amp learn how long does the battery. Inside woodworking, a 12-volt battery with 2.4 Ah takes longer than a 1.8 Ah, but it will cost more. If you frequently use the drill, you may prefer a more protracted drill battery.
Purchase a replacement battery from the hardware store or other retailer. If you not sure, you may need what voltage, you hit your manual before you buy.
Transform your drill over to cover the search for the battery. This is usually on the bottom of the drill. Search displays to an arrow, where the battery to resolve coverage.
Press the arrow to remove the battery cover. Put the cover next to you.
Turn around the drill, so that the old battery out slides. Put it on the table next to you.
Take the new battery out of the box. You slide it in the battery compartment, with you the positive and negative charges, so that the battery will work properly. Their drill should a chart, or you can remember the position of the old battery, if you removed it.
Put the battery back beyond the end of your drill and slide it back into place. You should hear a click when it is right aligned.
No comments:
Post a Comment