18v Dewalt Dw9096 Power Tool Battery - Why You Should do like that !

Dewalt Dw9096 Power Tool Battery is hot used in ouser lifes .It comes in a discharged health and must be expensed before use (refer to the devices hand-operated for charging instructions). Upon initial use (or after a prolonged warehouse period) the Dewalt Dw9096 may need three to four charge/discharge cycles before achieving maximum capacity. New Dewalt Dw9096 needs to be fully expensed and discharged (cycled) a few times before it can health to full capacity. Rechargeable batteries feel self-discharging when left unused. Always store a Power Tool Battery pack in a fully expensed staged for storage.When charging the Dewalt Dw9096 for the first time the gadget may indicate that charging is unblemished after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the Dewalt battery from the device, reinsert it and repeat the charging procedure

It is important to health (fully discharge and then fully charge) the Dewalt Dw9096 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not need conditioning). To discharge, naturally run the gadget under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that Dewalt Dw9096 be removed from the gadget and stored in a cool, dry, clean place.

Invest in a good charger for your power tools. Ni-Mh batteries should not be expensed in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are costly chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are regularly the best option of your power tools.

Be sure to store your Power Tool Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best warehouse conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your Dewalt Dw9096 in a sealed bag to keep them dry. It is a good idea to fee your NiCad or Ni-Mh batteries fully before use if they have been in storage.